Menu
New Add-ons 2024
Modix is proud to announce a new set of add-ons. Each of these add-ons is about to change the way you work with Modix printer and expand your capabilities. Please read below the detailed description of each add-on.
IDEX Calibration Tool
Griffin Ultra
Filament Dryer
Griffin Ultra Print head
Griffin Ultra is our latest super high-flow hotend, capable of extruding more than 500 grams per hour with 1.75mm filament. With doubled the length of the Griffin High-Flow (four time the standard Griffin) and dual massive cooling fan blowers, it’s a true game-changer. Due to much thicker layers and extrusion width, what once took 12 hours now finishes in just 2 with Griffin Ultra. It is not a low cost add-on, yet it’s a must have for every Modix’s user.
- Compatible with both Gen4 & Gen3 Modix BIG printers.
- Compatible with Gen4 IDEX (and IDEX upgraded Gen3).
- Due to a higher mounting, the nozzle is at the same height as Griffin
and therefore there is no reduction in print dimension on the z axis. - It reduces X axis at 50mm.
- Y axis is affected only in IDEX configuration and is reduced at 50mm.
- Print head weight: 900 grams (including motor, BMG, etc…)
- Nozzle diameters:1.6mm
- It is compatible with the standard Griffin (volcano) nozzles.
- Layer height range between 0.3-1.2mm
- Print speed – up to 250mm/sec (with thin layers of 0.3mm)
- Flow rate: 160mm³/s @1.6mm nozzle with 1.2mm layer height.
Price 1,000 USD
Filament Dryer Device
The active filament dryer is a critical step towards printing with high end filaments. It will allow customers to better print hygroscopic filaments such as water soluble support filaments, Nylon, PETG, PC and others with high level of success. The device is fully automatic and there is no water tank to empty or desiccant bags replace, just place the spool and close the door.
The dryer has a large print volume and a room for two spools of 5kg or a single spool of 8kg and even some space at the bottom to be used as dry storage for smaller spools.
- Dimensions:400 x 430 x 835 mm
- Weight 16.5 kg
Price – 1,500 USD
Learn more: https://www.modix3d.com/filament-dryer/
The dryer can sit on the floor next to the printer or on top of the large spool shelf.
Each spool is maintained in its position with
small adjustable brackets. One set is compatible with large spools and another set is compatible with smaller spools. You can even print your own position brackets and enjoy a stable feeding and reduce failures.
IDEX Calibration Tool
Achieving precise nozzle alignment is crucial for optimal IDEX printing, i.e. ensuring water-soluble filament do not mix with your main model. We’re excited to unveil a new hands-free calibration tool. It aligns each nozzle by engaging with the calibration tool from three angles, allowing the controller to accurately calculate offsets. This ensures reliable, high-quality multi-material printing every time. It will be offered as an add-on for owners of IDEX and later it will be part of the base IDEX offering.
The sensor is positioned and aligned with the help of the position bracket and attached to the bed with strong magnets so it will sit firmly while the nozzles touch from three directions to measure their offsets.
Price – 200 USD
The IDEX calibration tool consists of two main parts, the electronic controller which serves also the rest point while not in use and the sensor.
The sensor in its resting. The offsets parameters are stored in the controller. The calibration routine is needed every time you replace a nozzle.
Shipping options:
- Shipping is made with either UPS, FedEx or DHL, based on your location. Shipping terms: Incoterms 2020 DAP. Please contact sales for a shipping quote – sales@modix3d.com
- EU customers – If you’re an EU customer, please provide us with a valid VAT number. Without it, we’ll need to add an extra 21% VAT to your order
Our online shop supports two payment methods: Credit card and wired bank transfer.
For more information about delivery and terms, please visit our online shop guide here.
